- 121
- 484 865
GoForIt
Portugal
Приєднався 6 чер 2019
Go. Try it. Do it yourself
Here we take care of our own cars and bikes.
We build track cars.
We rebuild classic cars.
We do basic maintenance.
We test, install and review new stuff both on cars and bikes.
And for sure we use them.
Here we take care of our own cars and bikes.
We build track cars.
We rebuild classic cars.
We do basic maintenance.
We test, install and review new stuff both on cars and bikes.
And for sure we use them.
KTM & Husqvarna WP Xplor Fork Oil Seal and Bushing
For XPLOR fork caps fitted with preload adjusters, you should turn the preload adjuster with the cap when loosening from the cartridge. A KTM Special tool is available part # T14087. In my case, I designed and 3D printed a tool that works just fine. Damage to the preload adjuster thread may occur if you don't do this. If you want the stl for this tool, please leave a comment below and I will contact you.
If your XPLOR fork caps don't have preload adjusters you can just unscrew them from the cartridge rods without a special tool...
This shows you all the steps to change the fork oil seal in a WP XPLOR fork, fitted in 2020 KTM and Husqvarva offroad models. The video is long, but hopefully will help you, especially if it's the first time for you.
The required fork oil is WP SAE4.
The tool for installing the seals and the tool to set the air gap, I got them from Aliexpress.
If your XPLOR fork caps don't have preload adjusters you can just unscrew them from the cartridge rods without a special tool...
This shows you all the steps to change the fork oil seal in a WP XPLOR fork, fitted in 2020 KTM and Husqvarva offroad models. The video is long, but hopefully will help you, especially if it's the first time for you.
The required fork oil is WP SAE4.
The tool for installing the seals and the tool to set the air gap, I got them from Aliexpress.
Переглядів: 140
Відео
Toyota Auris Service - Fast easy and cheap
Переглядів 3396 місяців тому
In this video, I show how to do the basic maintenance ( oil, filter, air filter cabin filter) on a Toyota Auris Van. As an extra, I show how to reset the service without any computer or dedicated tool. Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: Go-For-It-547532252317418 Instagram: goforitgfi avalonkin...
Yamaha WR450F - Engine oil and filter
Переглядів 2327 місяців тому
In this video, I change the engine oil and filter on my 05 Yamaha WR450F. You can see the torque values and details in the vídeo itself. Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: Go-For-It-547532252317418 Instagram: goforitgfi avalonking.refr.cc/sergiom
Porsche Taycan - Screen Protector Install - Fast and Easy
Переглядів 2137 місяців тому
In this video, I show how I've installed the screen protectors on my Porsche Taycan 4S. The procedure is valid for all the versions of the Taycan from 2019 until 2023. You can find the screen protectors used at the links below. PCM: www.amazon.de/-/en/gp/product/B09HXVL51M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Center console screen: www.amazon.de/-/en/gp/product/B08X7C8G63/ref=ppx_yo...
Service B9 Detailed - Mercedes CLS 250 cdi Shootingbrake
Переглядів 2,9 тис.8 місяців тому
In this video, I show how I did my service B9 on my 2013 Mercedes CLS 250 cdi Shooting Brake. All the products and torque settings are described in the video. Feel free to comment and ask any questions. Automatic transmission fluid change: ua-cam.com/video/VCRf24dJYDs/v-deo.html Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: faceboo...
Mercedes CLS - Automatic Transmission Fluid Change
Переглядів 10 тис.9 місяців тому
In this video, I show how to change the transmission oil (ATF) on my 2013 Mercedes CLS Shootingbrake 250 CDI fitted with an automatic transmission 7G-tronic (722.908). During the video, I mentioned the torques and product specifications. Enjoy. Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: Go-For-It-547532252317418 Ins...
BMW R1200GS - How to replace the air filter - Detailed step by step
Переглядів 1,1 тис.Рік тому
In this video, I show step by step, how to replace the air filter on a 07 BMW R1200GS K25. It's a simple procedure but really useful, and that can be done with some basic hand tools. Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: Go-For-It-547532252317418 Instagram: goforitgfi avalonking.refr.cc/sergiom
BMW R1200GS How to Replace Battery - With basic tools
Переглядів 10 тис.Рік тому
BMW R1200GS How to Replace Battery - With basic tools
MX5 VVTurbo - #12 - ECU, wiring, fluids and 1st startup
Переглядів 191Рік тому
MX5 VVTurbo - #12 - ECU, wiring, fluids and 1st startup
How to install a Tow Bar on a 2010 Porsche Cayenne 957 - Quick and easy
Переглядів 2,7 тис.Рік тому
How to install a Tow Bar on a 2010 Porsche Cayenne 957 - Quick and easy
Front Lower Arm Bushing Replacement on a 2010 Porsche Cayenne 957 - Step by Step Guide
Переглядів 6 тис.Рік тому
Front Lower Arm Bushing Replacement on a 2010 Porsche Cayenne 957 - Step by Step Guide
Mercedes CLS - Water Pump Replacement - You can DO IT
Переглядів 3,7 тис.Рік тому
Mercedes CLS - Water Pump Replacement - You can DO IT
Installing a Rear View Camera on a 2010 Cayenne: Step-by-Step Guide
Переглядів 11 тис.Рік тому
Installing a Rear View Camera on a 2010 Cayenne: Step-by-Step Guide
Cheap and Easy Basic Maintenance for the Porsche Cayenne 957 Diesel
Переглядів 1,4 тис.Рік тому
Cheap and Easy Basic Maintenance for the Porsche Cayenne 957 Diesel
MX5 VVTurbo - #12 - Clutch, Gearbox and engine IN
Переглядів 162Рік тому
MX5 VVTurbo - #12 - Clutch, Gearbox and engine IN
MX5 VVTurbo - #11 - Engine final assembly
Переглядів 246Рік тому
MX5 VVTurbo - #11 - Engine final assembly
How to install XTRONS radio on Porsche Cayenne 957 - Quick and Easy
Переглядів 21 тис.Рік тому
How to install XTRONS radio on Porsche Cayenne 957 - Quick and Easy
MX5 VVTurbo - #10 - Camshafts and timing belt
Переглядів 203Рік тому
MX5 VVTurbo - #10 - Camshafts and timing belt
MX5 VVTurbo - #8 Engine main components assembly
Переглядів 292Рік тому
MX5 VVTurbo - #8 Engine main components assembly
MX5 VVTurbo - #7 Parts cleaning and preparation
Переглядів 136Рік тому
MX5 VVTurbo - #7 Parts cleaning and preparation
How to replace a headlight bulb - Porsche Cayenne 957
Переглядів 4,6 тис.Рік тому
How to replace a headlight bulb - Porsche Cayenne 957
MX5 VVTurbo - #6 Cylinder Head Preparation
Переглядів 338Рік тому
MX5 VVTurbo - #6 Cylinder Head Preparation
MX5 VVTurbo - #5 Engine Block Preparation
Переглядів 314Рік тому
MX5 VVTurbo - #5 Engine Block Preparation
How to change front brake pads and rotors - Mercedes CLS ShootingBrake
Переглядів 7 тис.Рік тому
How to change front brake pads and rotors - Mercedes CLS ShootingBrake
Hello! Do you know how this engine is called? It is a Pavesi engine, but which exact type is it?
Hi. As far as I know it's just called Pavesi 125CC Lamellar.
@@GFI Thank you very much!
I have a GS1200 its a 2007 model with ABs, I brought wired wheels, but the distance across the discs is too wide as measure 130, whereas the cast wheels measures 125... do you know why are there differences between the years? frustrating as cannot make the callipers sit wider
What model year are the wheels? There are differences for sure. Also the ABS ring can be different.
@@GFI they said were 2007-2009. I will need to check to see if they have a part number printed.
why do you people go through all this bollocks, I just can't believe the shit connected with owning a BMW . Get yourself a car you can actually drive.
Hello Sergio, First time here I bought 2007 the same color for my 40 birthday, so how can I request for you the spacer please?
Send me and email
Great video! How about model Y? 7:01 how to get to those 4 important bolts for camber adjustment but on model Y?? Would be highly helpful. Thank you in advance.
Hi. Not sure but I believe the procedure should be similar.
Just bought a led unit for my 2006 GS, how could I get hold of one of those spacers as don’t have a 3d printer?
Hi. Please send me an email.
All injectores lic
I used tbe same brand of diagnostic tool topdon.. However i cannot fint the health report. We have the same problem witj reception. But icNt find the real problem. Broken wirez or whatever.
Check the rear hinge. The problem is in that area for sure.
Hi man just wondering if it’s the same procedure on CLS320 v6 cdi from 2008 ( facelift model ) ? 🙏
I am not 100% sure, but it should be equal or really similar.
I know that this video is 2 years old , but i have the same problem with poor radio reception . I saw that you welded another wire in the outer layer - I suppose that it's the ground ? And where did you connect it ? To other ground or somewhere to body ? Thank you for response :) Cheers !
If I remember correctly I just weld it in one side and on the other because the original wire was totally broken.
Hello, the link to the Resistor Kit is no longer valid. Can you please send the information (seller, item name or new link) for the kit? Thank you!
The one I bought is not available anymore, and I cannot find the company name. Sorry.
Thank you, very informative Excellent mod
Thanks for you message. Do not forget to subscribe :)
Do you connect up the antenna ground wire to the Black vehicle ground wire ?
It was some time ago. In the video I show and explain all the connections in detail. Nothing was done off camera.
How did you get the internal panel of the tailgate off ?
If I remember correctly you have to push it out. It has a bunch of metal springs.
Boas. Tu es portugues? Eu tenho uma mota dessas. Sera que me podes ajudar com ela. Obrigado
Boas. Sim sou Português. Se souber ajudar. Qual é a questão?
@@GFI conhece o modelo igual a essa DT mas da Peugeot x125 . Sabe me dizer onde posso fazer a elétrica toda essa mota.? Onde comprar.
@@davidcarqueijeiro3237 fazer uma instalação nova, qualquer electricista auto deve conseguir fazer (especialmente se tiver a velha). Se estiver atento no facebook marketplace, por vezes aparecem vendedores a vender motas dessas às peças, pode ser que consiga encontrar uma instalação usada.
Replacing the battery is simple and easy, but do you have to code it?
Hello, may I ask ? I have on my tesla model 3 one front wheel tilted about 4mm in comparison the other side. Can it be adjusted by from the top of the suspension ?
By what I saw, 4mm it is maybe too much to be adjusted. But it is an easy procedure so maybe it worth try.
@@GFI but in general : When wheel is tilted (moved towards the back) then Can it be corrected from the top of the suspension as you did on your video ?
The top of the suspension is attached to a bracket that can be adjusted in and out. Can’t remember it you can move it back and forward. Sorry 😅
Hello, thank you for your superb video! Would it be possible to have the small 3D printed part to make the adjustment? Thanks in advance!
Hi Henri. Send me an email please.
Nice video, how much does B9 maintenancecost? mercedes oil is over 90€, but could I use Castrol Edge 5w30 instead?, And one more: I´m looking for the shooting brake 4 matic (so much rain in Galicia-Spain), What is the extra cost in this case? Thanks in advance.
Hi. This one in total was about €400 in parts. You can use the Castrol Edge with Mercedes approval. Not sure how much it will be more for the 4 matic but considering the oil change in the front diff it cannot be that expensive.
Thank you!
Con cuantos km hizo ese mentenimiento?
The computer asked B9 around 200k
Hi bro,i m Ali 64 yrs old,fm malaysia. Can u help me to get th wire to connect led taillight,convertion. And how much is th price.
Hi Ali. I found that on eBay, but now I cannot find the seller anymore.
@@GFI salam bro,ok thank,is that is th case,i got to duplicate th dighrmp.try to layout by my self.
I have a 2008 with a PCM2.0. Does your instructions work with my configuration?
It should be the same wiring. Have a look in your wires. It’s simple to pull the unit out.
If not the PCCM+ classic system is available for your 955 and should be compatible.
Seems that the resistor should be 50 Watt 6 Ohm
Thanks for the info.
Nice video, can I ask you how to disassemble the interior of back door.?
Hi. Just like I show in the video. You have a bunch of springs to pull.
Hello, Thanks you for video, I need reference for rear breaks Bosch
To be accurate it’s necessary to insert you car year and engine. I recommend you to check for example AUTODOC website, select your car and check the reference you need.
Hi where are you located?
Hi. Portugal.
Hm
Great Video, very informative. Thank you!
Thanks for your message. You have done more videos for the CLS in the channel.
Loved your video, man!
Thanks.
Boas, pelo vídeo. Só uma questão qual o aperto final de torque nos injectores??? Obrigado
Bom dia. O torque dos parafusos de fixação dos injetores é 26Nm para o motor N47.
Sabe me dizer qual o torque do bujão do óleo pra fazer o aperto
Bom dia. Depende do tamanho do bujão. Deixo os torques por tamanho. M12: 25Nm M18: 35Nm M22: 60Nm
Do I have to put the red one from the yellow thing in reverse-in?
It will depend how you want to feed the camera. Following my connection it work.
I have no wire with camera b+. Is all the names different for each brand?
Thanks for the video, it is really informative and encouraging. Is this jump starting tool really necessary when there is an auxiliary battery installed to car?
Thanks for your message. If you have the jumper it won’t hurt to connect it 😁
Leider kein Deutsch
It's nice to see other people repairing the 928 👍😀 I hope the 928 community on UA-cam will grow in the future. As of now the 928 is an underrated car.
Thanks for your message. The next one on the 929 will refresh the intake system, fuel system and spark. Do not forget to subscribe 😁
Hi, dude. This is very good resolution. I have same problem with light. Do you have above the picture from print on the sale ? Thank you ...
Hi. Send me an email goforit.channel@gmail.com
Your video inspired me to make the change I had now added the LED Blinkers and the main light and I love it, it looks great and I will enjoy it on my rides
Great to get your message. That is my main goal, to inspire people to Go For It. Thanks for your message. Enjoy and ride safe.
Great video
Thanks
i have the same unit, i have sound from radio but if i turn off the car and restart it no sound plays, any idea whats wrong.
That is really strange. What do you have to do to have sound again?
As standard there is a plain washer and a spring washer under the head of each terminal bolt.
It’s possible.
I went for a '4 wheel alignment' and the garage did not take out any of the frunk so I'm worried that it's not been done properly... My results sheet has no measurements for the caster too. Should I be worried?
Maybe your car was straight and they didn’t feel the need to touch the camber or the caster.
at my work they will half ass the alignment so beware. and they’ll just break off the corners of the bottom panel to adjust the rear toe. i’ve expressed my feelings about that but management does not care. they just want a quick 100$
Hi. Great video, thank you! Do you know the system code for changing certain settings? I need to change the video format, and Xtrons won’t answer me with a code… thank you!
Did you checked the manual that came with the radio?
Code 8888 is often the generic one for Chinese head units. It is worth a try.@@GFI
Your video helped me a lot. Thank You very much.
Thanks for you message. Do not forget to subscribe
I've bought a used 2016 CLS with 160,000km and a 7G tronic gear box. I am not sureif the previous owner has ever changed the transmission fluid or not. My questions: *Do you recommend changing transmission fluid now? *If yes, what will be the safest way to do thatin order to avoid any negative impact?
Hi. Mine requested the B9 with around 200k km. If it is shifting smooth I would stick to the recommendation of the car and keep doing the maintenance as requested. In other hand, if you feel more comfortable to change all the fluids and start fresh in your ownership, just change it. It’s not that hard as you can see in my video.
Excellent, thank you for the video.
Hi i have the same xtrons as yours connected exactly like you have shown and managed to get the sound working but then switched it off to finish routing the wires, switched unit on after 20 minutes and now no sound, can you help please
Hi mate. No idea why, that never happened to me. Review the connections and make sure nothing is disconnected by mistake. It’s the only reason I can think.
Hi cant find antenna wire on my main connector. I have 2 main connectors 1 which you have used and it had the antenna wire but i have to use the 2nd main connector and that has no antenna wire.
Hi mate connected mine switched on but no sound. Connected the optical fibre box. Any advice were im going wrong. Thanks
Hi have you got a link for the wire connectors please Thanks
I’ve just added the link to the video description. Do not forget to subscribe 😄.